BCS SD03 speed dome 66 Manual de instalación descargar pdf (Pagina 6)

1 INSTALLATION

1.1 Installation Preparation

Basic Requirement

z All installation and operation here should conform to your local electrical safety

codes.

z Before installation, please open the package and check all the components are

included. Please make sure the speed dome installation environment and

installation mode can meet your requirement. If there is special requirement,

please contact your local retailer for more information.

z We assume no liability or responsibility for all the fires or electrical shock caused

by improper handling or installation.

Check installation space and installation location intension

Please make sure the installation environment has enough space to install the speed

dome and its corresponding bracket.

Please make sure the ceiling, wall, bracket can support the speed dome and its

corresponding installation component. The safety factor shall be 4X.

About cable

Please select the cable according to your transmission distance.

The minimum video coaxial-cable requirement is:

z 75 ohm.

z Full cable with copper conductor

z 95% knitted copper shield

International Model Max Distance

(Ft\M)

RG59/U 750ft (229m)

RG6/U 1,000ft (305m)

RG11/U 1,500ft (457m)

Set dial switch button

Set dial switch button according to control protocol and speed dome address.

(Please refer to user’s manual for detailed information.)

Please keep all package material well for future use

Please keep speed dome package material well in case you need to send it back to

your local retailer or manufacturer for maintenance work.

Non-original package material may result in device damage during the transportation.

1.2 Installation Mode

1.2.1 Speed Dome Installation Mode

The integrated speed dome has the following installation modes:

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

Sin comentarios

BCS SD03 speed dome 66 Manual de instalación Pagina 6