BCS SD03 speed dome 66 Manual de instalación descargar pdf (Pagina 12)

Please use your hand to hold the camera and then adjust the lock tab between the

camera and the panel.

1— Captive screw and semi-circle groove.

2— AMP socket connector

3/4/5- three pilot spool

You can refer to Figure 2-7 for detailed information.

Now please turn the camera in the lock direction until the lock tab of the camera

fixing bracket meets the lock line of the camera.

Note:

After you reached the proper position, you can hear two clear sounds such as ping,

ping. Please draw the black camera cover down to the ground to check the

installation is secure or not.

Please keep the package material well for future use.

Figure 2-7

Connect the steel safety rope (Loosen the hexagon domed cap nut of the external

cover and then push the safety rope to the squeeze screw, finally fix the hexagon

domed cap nut). Connect to the heating strips (insert the spring cable cap to the

heating strips cap.) See Figure 2-8.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Sin comentarios

BCS SD03 speed dome 66 Manual de instalación Pagina 12